drumbox race between D16 and Audiorealism

If you need to write about anything else please do it here...
Post Reply
CosmicD
Posts: 156
Joined: Thu Feb 22, 2007 8:40 pm

drumbox race between D16 and Audiorealism

Post by CosmicD » Wed May 30, 2007 4:30 pm

Its interesting to see the discussions on fora about these 2 new boxes.

One thinks D16's doesn't match the 808 at all, another is complaining about the mid/high range being too pronounced and the sounds being too 'slim', another says that the ADM by audiorealism is too cheesy and fat..

But it's interesting that both match the 808 timbre very close. I always think if its coming down to things, you can change equalizing to make things you think are sounding too thin , beef it up with midlow or maximizers: It would be more important if the actual timbres were not sounding right.

For example i think the audiorealism's 808 cymbal lacks the typical swoosh that's in nepheton and in the 808 samples from the real 808 that are presented...

AudioRealism tells its 808 is 'laser gun free".. if that's a hint of critics, or if its meant to make it more 'authentic'.. I don't know...

Both have their pros and cons. Ofcourse it's too early for a n indepth review of the 2 because I'm not buying the ADM box anyway and i'm just talking about what I can determine from the page there...
Last edited by CosmicD on Wed May 30, 2007 6:36 pm, edited 1 time in total.
http://www.cosmicdreamer.be

rex_sole
Posts: 1
Joined: Wed May 23, 2007 10:30 pm

Post by rex_sole » Wed May 30, 2007 6:24 pm

Nepheton sounds astonishingly accurate to me. If folks base their expectations on how the 808 sounds from records or samples that have been processed and treated with that all-important compression (or slightly overdriven on their desk), they'll be disappointed that it doesn't actually sound as 'phat' as the legends state when raw.

It's also worth remembering that Audiorealism and D16's reference machines will sound different, as is the nature of analogue equipment. It's the character that is important, which Nepheton has nailed. From the audiorealism demos the toms and congas sound a bit off to me, but it's still very 808.

CosmicD
Posts: 156
Joined: Thu Feb 22, 2007 8:40 pm

Post by CosmicD » Wed May 30, 2007 9:30 pm

THe ADM sounds a bit creamy to me, that doesnt mean 'not right' it just means, very strong and kind of brute force in the middle... this is good for electronica music

but ofcoruse we all know in balads we would want a bit of a clean ish snare and all..

but once again this is hardly a shortcoming o a plugin, but a matter of mixing
http://www.cosmicdreamer.be

globalgoon
Posts: 45
Joined: Mon Jan 22, 2007 11:39 am

Post by globalgoon » Wed May 30, 2007 9:32 pm

UPDATED v5

on the adm site: http://audiorealism.se/adm/adm_announcement.htm

scroll down to:
Pattern comparsion 2

compare:
808: http://www.audiorealism.se/adm/808comp2.mp3
ADM: http://www.audiorealism.se/adm/admcomp2.mp3
my go with the nepheton: http://globalgoon.com/nepheton_comp2_v5.wav



i couldn't get the hihats quite right, but everything else is pretty close

it could be tweaked even further to sound a lot closer. (maybe someone else can have a go) - th relative levels of the drums aren't right.
the adm version of that 808 pattern sounds quite a way off to my ears
although i do like the sound of their machine!

The BPM was 102.08

npp and nsp files:
http://globalgoon.com/comparison0005.zip
Last edited by globalgoon on Thu May 31, 2007 10:14 am, edited 7 times in total.

CosmicD
Posts: 156
Joined: Thu Feb 22, 2007 8:40 pm

Post by CosmicD » Wed May 30, 2007 11:29 pm

I'm not sure but its as if the snare noise of the ADM has a cutoff filter or is a bit less "clear" than the nepheton one, you clearly hear that one produce noise and has a thin release envelope at the end without loosing high frequency...

ofcourse you can adjust the snappy but its not the same as with the adm
http://www.cosmicdreamer.be

rock
Posts: 5
Joined: Tue May 22, 2007 4:52 pm

Post by rock » Sun Jun 03, 2007 2:14 pm

The hihats of nepheton have to much resonance to me, sound to harsh.

ostiknostis
Posts: 57
Joined: Fri May 30, 2008 1:42 pm

Post by ostiknostis » Fri May 30, 2008 2:35 pm

Well, I made some A/B test at a mate's studio the other day, and I have to say that comparing ADM to Drumazon/Nepheton is like comparing apples with oranges.

The ADM is not an 'emulation' as such IMO: The sound sources have a lot to do with 909/808, but there's barely any controls for the sounds (the 'decay' parameter on the kik module, for example, just sucks - not nearly enough range).

I'd say that if you want to compare ADM & D16 drum machines in terms of "which comes closer to the real kikumoto jewels", D16 wins both hands down easily!

Now if you consider ADM as "a nice user-PCM-friendly beatbox ala reason's redrum", it's not a bad machine at all. Like people stated, it has a sound of its own (quite a good one at that too) But not much to do with emulating a 808 or a 909, I'm afraid.

This was why I chose D16 - I'd rather have the (proven) kikumoto sound instead of a generic 808/909ish synth drum sound.

xms
Posts: 27
Joined: Tue Feb 20, 2007 9:49 am

Post by xms » Tue Jul 15, 2008 12:57 pm

ADM works as AU and as AU MultiOutput. End of story. D16 lost the Mac game.

XMS

ostiknostis
Posts: 57
Joined: Fri May 30, 2008 1:42 pm

Post by ostiknostis » Mon Jul 28, 2008 3:21 pm

xms wrote:ADM works as AU and as AU MultiOutput. End of story. D16 lost the Mac game.

XMS
You're just being impatient. It's just a matter of time before we'll have drumazon & nepheton in AU land, and when we do, ADM has lost again! ;)

globalgoon
Posts: 45
Joined: Mon Jan 22, 2007 11:39 am

Post by globalgoon » Sat Sep 20, 2008 12:09 pm

I just have to add: I love both the ADM and nepheton, I use both regularly :lol:

matt@postpro.org
Posts: 15
Joined: Sun Dec 16, 2007 1:15 am
Location: Raleigh, NC USA

Hey ostiknostis

Post by matt@postpro.org » Sun Dec 28, 2008 5:47 am

So... Here it is almost 2009. Happy New Year.

Are we still being impatient with proper AU support? How about proper VST support on the Mac? Still doesn't work with a wrapper, RTAS or AU...

I think it's safe to say those of us who bought the plugs based on the advertisements can be a little annoyed at this point. More than disappointed.

Sorry, but there is no reason to make excuses at this point for d16. No one is being impatient when the wait has been this long.

matt@postpro.org
Posts: 15
Joined: Sun Dec 16, 2007 1:15 am
Location: Raleigh, NC USA

Hey ostiknostis

Post by matt@postpro.org » Sun Dec 28, 2008 5:47 am

So... Here it is almost 2009. Happy New Year.

Are we still being impatient with proper AU support? How about proper VST support on the Mac? Still doesn't work with a wrapper, RTAS or AU...

I think it's safe to say those of us who bought the plugs based on the advertisements can be a little annoyed at this point. More than disappointed.

Sorry, but there is no reason to make excuses at this point for d16. No one is being impatient when the wait has been this long.

User avatar
s-tek
Posts: 54
Joined: Tue Jul 17, 2007 10:39 pm
Location: Berlin | Germany
Contact:

Post by s-tek » Fri Jan 02, 2009 11:40 pm

i've checked both(nepheton and adm) in the past, and my result is =>
i bought the nepheton from d16! :D
adm sounds to boring for me.
https://audiolabor.bandcamp.com

Post Reply